LM-SG Portable Drill Bit Resharpening Machine
Specification
規格 | 研磨範圍 | 先端角 | 電源 | 馬達 | 轉速 | 重量 |
|---|---|---|---|---|---|---|
| LM-SG-213 | Ø2~Ø13 | 85°~140° | AC110/AC220V (單相) | 200W | 6000 | 9.00 |
| LM-SG-830 | Ø8~Ø30 | 85°~140° | AC110/AC220V (單相) | 450W | 4000 | 27.00 |
LM-SG-213 Mating parts
▍Standard Accessories
- ER Collet 2.5, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm (Total 12 pcs)
- CBN Diamond Wheel #200 (For HSS Drill) Wheel Spec.: LM-GW-B200(B)
- Hexagon Wrench 4mm x 5mm (1 pc each)
▍Special Accessories
- SDC Diamond Wheel #400 (For Carbide Drill) Wheel Spec.: LM-GW-S400(C)
- CBN Diamond Wheel #400 (For HSS Drill below 4mm) Wheel Spec.: LM-GW-B400(A)
- ER Collet 2.5 mm, 3.5mm ~ 12.5mm (11 pcs)
LM-SG-830 Mating parts
▍Standard Accessories
- ER Collet 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 mm (Total 15 pcs)
- CBN Diamond Wheel #200 (For HSS Drill) Wheel Spec.: LM-GW-B150(J)
- Hexagon Wrench 4mm x 5mm (1 pc each)
▍Special Accessories
- SDC Diamond Wheel #200 (For Carbide Drill) Wheel Spec.: LM-GW-S200(K)
- ER Collet 8~12 mm, 26~30 mm
Procedures for changing the grinding wheel
▍Steps for Replacing the Diamond Wheel
- Loosen the knob (B1) on the right side of the machine and open the side cover (B2).
- Use a 4mm hexagon wrench to loosen the screw (B3) counterclockwise.
- Replace with a new diamond wheel and tighten the screw back up.
- Close the side cover (B2) securely and tighten the knob (B1).
Caution! Do not turn on the power before the diamond wheel screw (B3) is securely tightened, the side cover (B2) is closed, and the knob (B1) is tightened, to avoid any danger.