SNFX Inserts – SDC/GDC Side Milling Cutters – For Machining P, M, K, H, and N Material Groups
SNFX規格表
形狀 Shape | 規格 Spec. | Applicable Work Materials and Cutting Conditions | 規格 Spec. | Applicable Work Materials and Cutting Conditions | 規格 Spec. | Applicable Work Materials and Cutting Conditions | d | i | s | r | 圖形 Drawing |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SNFX1102 OM4010 |
| SNFX1102 OM4025 |  | SNFX1102 OM5005 | | 11 | - | 2.3 | - | |
| SNFX1103 OM4010 |
| SNFX1103 OM4025 | | SNFX1103 OM5005 | | 11 | - | 2.7 | - | ||
SNFX1203 OM4010 |
| SNFX1203 OM4025 | | SNFX1203 OM5005 | | 12.7 | - | 3.2 | - | ||
SNFX1205 OM4010 |
| SNFX1205 OM4025 |
| SNFX1205 OM5005 |
| 12.7 | - | 5.4 | - | ||
SNFX1207 OM4010 |
| SNFX1207 OM4025 |
| SNFX1207 OM5005 |
| 12.7 | - | 7 | - |
SNFX-R規格表
形狀 Shape | 規格 Spec. | Applicable Work Materials and Cutting Conditions | 規格 Spec. | Applicable Work Materials and Cutting Conditions | 規格 Spec. | Applicable Work Materials and Cutting Conditions | d | i | s | r | 圖形 Drawing |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SNFX120305 OM4010 |
| SNFX120305 OM4025 | | SNFX120305 OM5005 | | 12.7 | - | 2.3 | 0.5 | |
| SNFX120310 OM4010 |
| SNFX120310 OM4025 | | SNFX120310 OM5005 | | 12.7 | - | 2.7 | 1.0 | ||
SNFX120315 OM4010 |
| SNFX120315 OM4025 | | SNFX120315 OM5005 | | 12.7 | - | 3.2 | 1.5 | ||
SNFX120505 OM4010 |
| SNFX120505 OM4025 |
| SNFX120505 OM5005 | | 12.7 | - | 5.4 | 0.5 | ||
SNFX120510 OM4010 |
| SNFX120510 OM4025 |
| SNFX120510 OM5005 | | 12.7 | - | 5.4 | 1.0 | ||
SNFX120515 OM4010 |
| SNFX120515 OM4025 |
| SNFX120515 OM5005 | | 12.7 | - | 5.4 | 1.5 | ||
SNFX120516 OM4010 |
| SNFX120516 OM4025 |
| SNFX120516 OM5005 | | 12.7 | - | 5.4 | 1.6 | ||
●SNFX120520 OM4010 |
| SNFX120520 OM4025 |
| SNFX120520 OM5005 |
| 12.7 | - | 5.4 | 1.6 | ||
SNFX120705 OM4010 |
| SNFX120705 OM4025 |
| SNFX120705 OM5005 | | 12.7 | - | 7 | 0.5 | ||
SNFX120710 OM4010 |
| SNFX120710 OM4025 |
| SNFX120710 OM5005 | | 12.7 | - | 7 | 1.0 | ||
SNFX120715 OM4010 |
| SNFX120715 OM4025 |
| SNFX120715 OM5005 | | 12.7 | - | 7 | 1.5 | ||
●SNFX120720 OM4010 |
| SNFX120720 OM4025 |
| SNFX120720 OM5005 |
| 12.7 | - | 7 | 1.5 |
● Produced order by order.
ISO分類 | 切削狀態Cutting Condition : | |||
|---|---|---|---|---|
● 連續切削 Continuous Cutting | ○ 一般切削 General Cutting | ■ 斷續切削 Interrupted Cutting | ||
P | 合金鋼Alloyed Steels | | | |
M | 不鏽鋼Stainless Steels | | | |
K | 鑄鐵Cast Iron | | | |
N | 鋁及鋁合金Aluminum&Al | | | |
S | 高溫合金Refractory Alloys | | | |
H | 高硬度材Hard Material | | | |